Grid view List view

Showing 113–128 of 238 resultsSorted by price: high to low

Breadboard Power Supply Module MB102

Breadboard Power Supply Module MB102

90.00 EGP

In stock

Power supply module for breadboard applications (3.3V, 5V, and VDC).

 

  Features : 

 

  • Input voltage range 6.5V >> 15V.
  • Output voltages 3.3V, 5V, and Vin.
  • Output 5V (USB type A female socket).
  • Output voltages are available via screw terminal block and pin header for flexibility.
  • ON/OFF switch.
  • Reverse polarity protection.
  • Over current protection (1A).
Add to cart
4 Port USB 2.0 HubOut of stock

4 Port USB 2.0 Hub

80.00 EGP

Out of stock

This USB hub has four USB 2.0 ports each with a max total transmission speed of up to 480 MBps. All four ports are powered through the USB-B cable.
This hub is great for giving your laptop or computer a few more plug-in options, no adapter is required.

 

  Features: 

 

  • Number of ports: 4.
  • no adapter is required.
  • PC interface: USB type B.
  • USB device interface: USB type A.
  • Output: 100mA MAX.
  • Two (Ø 3.5mm) mounting holes for easy installation.
Details
5A Current Sensor Module (ACS712)

5A Current Sensor Module (ACS712)

80.00 EGP

In stock

5A Current Sensor Module (ACS712).

 

  Features:
  • Operating voltage: 5V.
  • Green LED for power indication.
  • Input interface 5.08mm screw clamp terminal.
  • Power and output signal interface: 2.54mm male pin header.
  • Maximum current: 5A.
  • Dimension: 30 X 13 X 12mm.
Add to cart
DB25 Vertical Male to Screw Terminal + Pin Header

DB25 Vertical Male to Screw Terminal + Pin Header

80.00 EGP

In stock

DB25 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector. DB25 is also suitable for panel mounting and test applications.

 

  Features :
  • DB25 pins are routed to pin headers and screw clamp terminals.
  • Both terminals are labeled according to the DB25 pin number to which they are routed.
  • Pin header pitch distance 2.54mm.
  • Screw terminal pitch distance 3.5mm.
  • Four (Ø 4mm) mounting holes for easy installation.
  • Dimensions: 65 X 45 X 25mm.
Add to cart
4 Digits 0.36” 7-Segment Display Module 36D400

4 Digits 0.36” 7-Segment Display Module 36D400

80.00 EGP

In stock

36D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
Real Time Clock Module (DS1307 & 4K Memory 24C32)

Real Time Clock Module (DS1307 & 4K Memory 24C32)

75.00 EGP

In stock

This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.

 

  Features :

 

  •  Operating voltage 5V.
  •  Supports the 24-hour or 12-hour format with an AM/PM indicator.
  • Interface: I2C.
  • On-board 4K I2C serial EEPROM.
  • On-board CR2032 3V lithium battery.
  • Two (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 36 X 24 X 10mm.
Add to cart
1-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM105I

1-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM105I

75.00 EGP

In stock

1-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 66 X 30 X 20mm.
Add to cart
1-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM124I

1-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM124I

75.00 EGP

In stock

1-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 66 X 30 X 20mm.
Add to cart
1-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM112I

1-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM112I

75.00 EGP

In stock

1-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 66 X 30 X 20mm.
Add to cart
Real Time Clock Module (DS1307)

Real Time Clock Module (DS1307)

75.00 EGP

In stock

This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.

 

  Features :

 

  •  Operating voltage 5V.
  •  Supports the 24-hour or 12-hour format with an AM/PM indicator.
  • Interface: I2C.
  • On-board CR2032 3V lithium battery.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 37 X 26 X 10mm.
Add to cart
1-Channel Solid State Relay Module (5V) SSR105

1-Channel Solid State Relay Module (5V) SSR105

75.00 EGP

In stock

1-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.

 

  Features : 

 

  • Input signal: 5V (active high).
  • Maximum output current: 2A.
  • Maximum output voltage: 240VAC.
  • 2 Ampere overcurrent protection fuse.
  • LED indicator.
Add to cart
2-Channel Isolation Module

2-Channel Isolation Module

70.00 EGP

In stock

2-channel opto-isolated module suitable for voltage level converting.

   Features :
  • Two selectable Input control signal ranges (3-12V and 9-24V).
  • Output signal range: 3-24V.
  • LED indicator for each input.
  • Dedicated 2-pin screw clamp terminal for each input and output.
  • Output can drive high or low-triggered load.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
  • Dimensions: 50 X 50 X 17mm.
Add to cart
DB25 Male to Screw Terminal + Pin Header

DB25 Male to Screw Terminal + Pin Header

70.00 EGP

In stock

DB25 male socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB25 and is also suitable for breadboard test applications.

 

  Features :
  • DB25 pins are routed to pin headers and screw clamp terminals.
  • Both terminals are labeled according to the DB25 pin number to which they are routed.
  • Pin header pitch distance 2.54mm.
  • Screw terminal pitch distance 3.5mm.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 93 X 33 X 15mm.
Add to cart