Grid view List view

Showing 49–64 of 238 resultsSorted by price: high to low

4-Channel Solid State Relay Module (5V) SSR405

4-Channel Solid State Relay Module (5V) SSR405

280.00 EGP

In stock

4-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.

 

  Features : 

 

  • Input signal: 5V (active high).
  • Maximum output current: 2A.
  • Maximum output voltage: 240VAC.
  • 2 Ampere overcurrent protection fuse.
  • LED indicator.
Add to cart
8-Channel Non-Isolated Positive Triggered Relay Module (RM8VE)

8-Channel Non-Isolated Positive Triggered Relay Module (RM8VE)

250.00 EGP

In stock

8-Channel 5V relay module with wide 5–40V input range, LM2576 power regulation, ULN2803 driver, and screw terminals for easy wiring.

 

 Features :

 

  • 8-Channel relay module using T73 relays (rated 10A for resistive loads; recommended ≤ 5A for inductive loads).
  • Wide input voltage range: 5V to 40V selectable via 3-pin jumper.
  • 5–7V mode: Direct input to relays.
  • 7–40V mode: Onboard LM2576 buck converter outputs stable 5V.
  • Relay coil voltage: 5V for all channels.
  • Compatible trigger signal range: 3V to 24V.
  • Integrated ULN2803 driver IC with built-in flyback diodes for relay protection.
  • Additional reverse polarity protection diode on power input.
  • Each relay has LED indicator for status visualization.
  • Output terminals: 3-pin screw connectors (NC, COM, NO) per relay.
  • Input & power via 10-pin screw terminal (2 power pins + IN1 to IN8).
  • High-quality PCB with white silkscreen legend for easy wiring identification.
  • Four mounting holes (Ø 3.5 mm) for secure installation.

 

 

Add to cart
8-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM824I

8-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM824I

220.00 EGP

In stock

8-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact ( isolated mode ).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 146 X 66 X 20mm.
Add to cart
ARM STM32F103C Blue Pill Project Kit

ARM STM32F103C Blue Pill Project Kit

220.00 EGP

In stock

Blue Pill development board is based on STM32F103C8T6 32-bit Cortex-M3 RISC ARM core. This module contains the essential components and circuits to build your own ARM-based system. Blue Pill project kit is a versatile kit for easy soldering components on a test board and building fast projects based on Blue Pill development board. Double-layer PCB is used to enable components to solder on either face.

 

   Features :
  • Project Kit can be powered from any general DC adaptor 9-12V thanks to an on-board 5V regulator.
  • On-board reverse polarity protection.
  • All Blue Pill pin headers are exposed to screw clamp terminals for easy access.
  • Large size work area 144 horizontal lines X 5 points, 36 X 3 vertical 5V lines, 36 X 3 vertical GND lines, 36 lines X 2 points (Blue pill pins in addition to power rails GND, 5V, VIN).
  • Project Kit provides a CR2032 socket for a 3V battery ( no battery included ).
  • Dimensions: 185 X 108 X 20mm.
Add to cart
Sale!
16-Channel Relay Module (12V) RM1612Out of stock

16-Channel Relay Module (12V) RM1612

Original price was: 260.00 EGP.Current price is: 220.00 EGP.

Obsolete

16 Channel relay module (12V) up to 10A rated current directly interfaced to microcontroller or TTL logic.

Details
8-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM812I

8-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM812I

220.00 EGP

In stock

8-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 140 X 66 X 20mm.
Add to cart
8-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM805I

8-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM805I

220.00 EGP

In stock

8-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 146 X 66 X 20mm.
Add to cart
PIC Project Kit

PIC Project Kit

220.00 EGP

In stock

PIC Project kit supports 40-pin DIP PIC microcontrollers such as PIC6F877A, 18F452, and more.

 

  Features :
  • Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
  • On-board reverse polarity protection.
  • All microcontroller ports are exposed to screw clamp terminals for external use.
  • Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
  • Project Kit contains a Reset push button switch.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 181 X 105 X 21mm.
Add to cart
AVR Project Kit

AVR Project Kit

220.00 EGP

In stock

AVR Project Kit supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.

 

  Features :
  • Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
  • On-board reverse polarity protection.
  • All microcontroller ports are exposed to screw clamp terminals for external use.
  • Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
  • Project Kit contains a Reset push button switch.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 181 X 105 X 21mm.
Add to cart
Raspberry Pi Pico Work Area

Raspberry Pi Pico Work Area

210.00 EGP

In stock

Raspberry Pi Pico work area.

  Features :
  • Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
  • On-board reverse polarity protection.
  • All Raspberry Pi Pico ports are exposed to screw clamp terminals for external use.
  • Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
  • Project Kit contains a Reset push button switch.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 175 X 99 X 20mm.
Add to cart
Arduino Uno Work Area

Arduino Uno Work Area

200.00 EGP

In stock

A versatile kit for easy soldering components on a test board and building fast projects based on Arduino Uno board. In ver2 a double-layer PCB is used to enable soldering of components on either face. Also, an ISP header is added to comply with Arduino shields.

Add to cart
Project Work Area

Project Work Area

190.00 EGP

In stock

FR4 PCB General project work area with DC power input and regulation.

  Features :
  • Double layer FR4 PCB.
  • Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
  • On-board reverse polarity protection.
  • 15 External input via screw clamp terminals 3.5mm pitch.
  • Large size work area 148 horizontal lines X 5 points, 37 X 3 vertical 5V lines, 37 X 3 vertical GND lines, 15 lines X 2 points (in addition to power rails GND, 5V, VIN).
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 118 X 108 X 20mm.
Add to cart