DB9 female socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for breadboard test applications.
Features :
DB9 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the DB9 pin number to which they are routed.
Pin header pitch distance 2.54mm.
Screw terminal pitch distance 3.5mm.
Two (Ø 3.5mm) mounting holes for easy installation.
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
6-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
RJ45 8pin socket on PCB to block terminals and pin header facilitates solderless connection to RJ45 connector and is also suitable for breadboard test applications.
Features :
RJ45 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the RJ45 pin number to which they are routed.
Pin header pitch distance is 2.54mm.
Screw terminal pitch distance is 3.5mm.
Two (Ø 3.5mm) mounting holes for easy installation.
RJ45 8pin socket vertical type on PCB to block terminals and pin header facilitates solderless connection to RJ45 connector and is also suitable for panel mounting and test applications.
Features :
RJ45 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the RJ45 pin number to which they are routed.
Pin header pitch distance is 2.54mm.
Screw terminal pitch distance is 3.5mm.
Two (Ø 3.5mm) mounting holes for easy installation.
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
USB a wide voltage comparator LM393.
Operating voltage: 3.3 ~ 5V.
Active low output i.e an interruption produces a low output (LED is activated).
Maximum output sink current: 10mA.
5mm slot width.
Two (Ø 3.5mm) mounting holes for easy installation.
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
USB a wide voltage comparator LM393.
Operating voltage: 3.3 ~ 5V.
Active low output i.e an interruption produces a low output (LED is activated).
Maximum output sink current: 10mA.
5mm slot width.
Two (Ø 3.5mm) mounting holes for easy installation.
AVR ISP converter. It converts standard 10-pin IDC male connector (2X5) to standard 6-pin header connector (2X3) which is suitable for Arduino ISP programming connector and to 6-pin header male connector for flexibility.
Features :
Supported connectors: 2X5pin male IDC / 2X3pin female header / 1X6pin male header.
All connectors are clearly silkscreen labeled to clarify the connection.
