Arduino Uno Breakout Board
135.00 EGPIn stock
Arduino Uno Breakout Board.
4-Channel Active High Relay Module (24V) RM424
135.00 EGPIn stock
4-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
4-Channel Active High Relay Module (5V) RM405
135.00 EGPIn stock
4-Channel relay module (5V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
4-Channel Active High Relay Module (12V) RM412
135.00 EGPIn stock
4-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
8-Channel Isolation Module
130.00 EGPIn stock
8-channel opto-isolated module suitable for voltage level converting.
Features :
- Two selectable Input control signal ranges (3-12V and 9-24V).
- Output signal range: 3-24V.
- LED indicator for each input.
- Dedicated 2-pin screw clamp terminal for each input and output.
- Output can drive high or low-triggered load.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 129 X 50 X 17mm.
10A AC Line Filter
130.00 EGPIn stock
AC 250V 10A EMI Filter.
Features :
- Maximum operating voltage: AC250V.
- Maximum Current: 10 Ampere.
- Cut-off frequency: 5KHz.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 60 X 30 X 30mm.
Arduino Uno Project Kit
130.00 EGPIn stock
Versatile kit for easy soldering components on a test board and building fast projects based on Arduino Uno.
USB to RS232 Serial Module (CH340) B-Type USB Socket to DB9/Header
120.00 EGPIn stock
This USB to RS232 converter is based on CH340 USB to serial IC. It provides a virtual serial port over USB 2.0 port. Serial signals are provided in RS232 level to both header pins and standard DB9 male socket. Once you have installed the drivers the module will appear as a normal serial COM port on your computer making it compatible with most terminal programs and development environments.
Features :
- Provides virtual serial port over USB2.0 port.
- Supports Win7, Win8, Win10 32/64Bit.
- B-type socket Full speed 2.0 USB interface.
- Supports up to 2Mbps baud rates.
- RS232 signals are provided to both pin header and Standard DB9 socket for flexibility.
- Self-powered from USB 5V.
- Supports Rx, Tx, DTR, and DSR signals.
- Red LEDs indicator for Rx and Tx signals.
- Green LED for power status.
- 5V from USB is available to header pin for supplying external devices (100mA MAX).
- Two 3mm mounting holes for easy installation.
- Dimensions: 64X33X19 mm.
3+3+2 Digits 0.56” 7-Segment Display Module 56D332
Price range: 110.00 EGP through 115.00 EGPIn stock
56D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
4+4 Digits 0.56” 7-Segment Display Module 56D440
Price range: 110.00 EGP through 115.00 EGPIn stock
56D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
8 Digits 0.56” 7-Segment Display Module 56D800
Price range: 110.00 EGP through 115.00 EGPIn stock
56D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
Real Time Clock Module (DS3231)
110.00 EGPIn stock
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage: 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board CR2032 3V lithium battery.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 33 X 30 X 10mm.
4 Digits 0.56” 7-Segment Display Module 56D400
Price range: 100.00 EGP through 105.00 EGPIn stock
56D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
ARM STM32F401 Black Pill Breakout Board
100.00 EGPIn stock
Small handy board on which you can plug your Black Pill development board with screw terminals to get much easier to the GPIO pins.
Features :
- All Black Pill pins are provided to 3.5mm pitch screw clamp terminals for easy access.
- Screw terminals are clearly silkscreen labeled (top and bottom) to clarify the connection.
- Four (Ø 3mm) mounting holes for easy installation.
- Dimensions: 89 x 60 x 12 mm.
30A Current Sensor Module (ACS712)
100.00 EGPIn stock
30A Current Sensor Module (ACS712).
Features:
- Operating voltage: 5V.
- Green LED for power indication.
- Input interface 7.5mm screw clamp terminal.
- Power and output signal interface: 2.54mm male pin header.
- Maximum current: 30A.
- One (Ø 3.5mm) mounting hole for easy installation.
- Dimension: 34 X 15 X 14mm.
4-Channel DC Power Distributor
100.00 EGPIn stock
4-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 91 x 72 x 20mm.