Grid view List view
4-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM412I

4-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM412I

150.00 EGP

In stock

4-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 80 X 66 X 20mm.
Add to cart
4-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM405I

4-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM405I

150.00 EGP

In stock

4-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four mounting holes for easy installation.
  • Dimension: 80X66X20 mm.
Add to cart
Real Time Clock Module (DS3231 & 4K Memory 24C32)

Real Time Clock Module (DS3231 & 4K Memory 24C32)

140.00 EGP

In stock

This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.

 

  Features :

 

  • Operating voltage 5V.
  • Supports the 24-hour or 12-hour format with an AM/PM indicator.
  • Interface: I2C.
  • On-board 4K I2C serial EEPROM.
  • On-board CR2032 3V lithium battery.
  • Two (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 34 X 24 X 10mm.
Add to cart
6-Channel DC Power Distributor

6-Channel DC Power Distributor

140.00 EGP

In stock

6-Channel DC power distributor module.

   Features :
  • Operating voltage: 5~48 DCV.
  • Maximum output current: 10A/Channel.
  • Protection fuse for each channel.
  • Green LED indicator for input voltage.
  • Red LED indicator for each output voltage.
  • 100nF filter capacitor for each output channel.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
  • Dimension: 119 X 73 X 19mm.
Add to cart
8-Channel Isolation Module

8-Channel Isolation Module

130.00 EGP

In stock

8-channel opto-isolated module suitable for voltage level converting.

   Features :
  • Two selectable Input control signal ranges (3-12V and 9-24V).
  • Output signal range: 3-24V.
  • LED indicator for each input.
  • Dedicated 2-pin screw clamp terminal for each input and output.
  • Output can drive high or low-triggered load.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
  • Dimensions: 129 X 50 X 17mm.
Add to cart
10A AC Line Filter

10A AC Line Filter

130.00 EGP

In stock

AC 250V 10A EMI Filter.

  Features :
  • Maximum operating voltage: AC250V.
  • Maximum Current: 10 Ampere.
  • Cut-off frequency: 5KHz.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 60 X 30 X 30mm.

 

Add to cart
USB to RS232 Serial Module (CH340) B-Type USB Socket to DB9/Header

USB to RS232 Serial Module (CH340) B-Type USB Socket to DB9/Header

120.00 EGP

In stock

This USB to RS232 converter is based on CH340 USB to serial IC. It provides a virtual serial port over USB 2.0 port. Serial signals are provided in RS232 level to both header pins and standard DB9 male socket. Once you have installed the drivers the module will appear as a normal serial COM port on your computer making it compatible with most terminal programs and development environments.

 

  Features :

 

  • Provides virtual serial port over USB2.0 port.
  • Supports Win7, Win8, Win10 32/64Bit.
  • B-type socket Full speed 2.0 USB interface.
  • Supports up to 2Mbps baud rates.
  • RS232 signals are provided to both pin header and Standard DB9 socket for flexibility.
  • Self-powered from USB 5V.
  • Supports Rx, Tx, DTR, and DSR signals.
  • Red LEDs indicator for Rx and Tx signals.
  • Green LED for power status.
  • 5V from USB is available to header pin for supplying external devices (100mA MAX).
  • Two 3mm mounting holes for easy installation.
  • Dimensions: 64X33X19 mm.
Add to cart
3+3+2 Digits 0.56” 7-Segment Display Module 56D332

3+3+2 Digits 0.56” 7-Segment Display Module 56D332

Price range: 110.00 EGP through 115.00 EGP

In stock

56D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
4+4 Digits 0.56” 7-Segment Display Module 56D440

4+4 Digits 0.56” 7-Segment Display Module 56D440

Price range: 110.00 EGP through 115.00 EGP

In stock

56D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
8 Digits 0.56” 7-Segment Display Module 56D800

8 Digits 0.56” 7-Segment Display Module 56D800

Price range: 110.00 EGP through 115.00 EGP

In stock

56D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
Real Time Clock Module (DS3231)

Real Time Clock Module (DS3231)

110.00 EGP

In stock

This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.

 

   Features :

 

  • Operating voltage: 5V.
  • Supports the 24-hour or 12-hour format with an AM/PM indicator.
  • Interface: I2C.
  • On-board CR2032 3V lithium battery.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 33 X 30 X 10mm.
Add to cart
4 Digits 0.56” 7-Segment Display Module 56D400

4 Digits 0.56” 7-Segment Display Module 56D400

Price range: 100.00 EGP through 105.00 EGP

In stock

56D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page