Spark CNC Controller is a completely buffered USB-controlled CNC breakout board. Supports 4 axes, four inputs, three output relays, analog output 0-10V, and can be powered from 220VAC .
VIVA+ is a completely buffered CNC parallel breakout board. Supports up to 6 axes, five inputs, spindle and coolant output relays, analog output 0-10V, watchdog protection with extra output relay, and is powered from 220VAC.
VIVA+Features :
Completely supports MACH3 and any other soft tool that uses an LPT port.
AC 220V input power.
6 axes control signals (Pulse ”PUL” and Direction “DIR”) :
Main / Auxiliary X-axis.
Main / Auxiliary Y-axis.
Z-axis.
A-axis.
B-axis.
C-axis.
Control signals are TTL compatible (10mA).
Supports five external inputs. Three inputs for axes limits (NPN proximity sensors or micro switch inputs) and two inputs for emergency stop and probe inputs (dry contact).
All inputs are optically isolated for safety.
Two relay outputs for spindle and coolant control (5A maximum current).
Optional extra output relay (controlled from pin9).
0-10V analog output (PWM-controlled) for controlling spindle speed.
Watchdog feature with optional relay output to ensure that all outputs are disabled during PC starting up and software program loading.
All outputs and inputs are brought out via pluggable screw clamp connectors for flexibility.
LED indicator for :
Output pulse signal “PUL” (RED LED).
Output direction signal “DIR” (Green LED).
Output relays “spindle”, “coolant” and “watchdog” (RED LED).
Input signals ”XL”, ”YL”, ”ZL”, ”EMR”, and ”PRB” (Yellow LED).
RM8U is an 8-channel USB-controlled relay module. It can be used to control electrical devices remotely from a PC over a USB port such as lamps, motors, and locks. RM8U features a wide operating voltage range (9-40V) and supports serial communication baud rate speeds starting from 2400 up to 115200 bps. RM8U module is well protected, filtered, and fully isolated.
The RM8N is an 8-channel wireless relay module based on the nRF24L01+ chip from Nordic Semiconductor. The nRF24L01 module is designed to operate in the global 2.4GHz ISM frequency band and uses GFSK modulation to transmit data. The card is well-protected, filtered, and easy to install. RM8N outputs can drive loads up to 10A (resistive loads).
Features:
Based on nRF24L01+ module.
On-board 3.3V,5V regulator.
Power input is filtered for noise reduction.
LED for power indication.
Operating voltage DC12V.
Eight output relays with red LED indicators.
Both normal open and normal close terminals are available.
Relay outputs are available through 5mm 2-pin K128 screw clamp terminals.
Easy configuration and test.
Reset push button switch is included.
DIN Rail mountable.
Four (Ø 3.5mm) mounting holes for easy installation.
Out of stock
Out of stock
