Grid view List view
30A Current Sensor Module (ACS712)

30A Current Sensor Module (ACS712)

100.00 EGP

In stock

30A Current Sensor Module (ACS712).

 

   Features:
  • Operating voltage: 5V.
  • Green LED for power indication.
  • Input interface 7.5mm screw clamp terminal.
  • Power and output signal interface: 2.54mm male pin header.
  • Maximum current: 30A.
  • One (Ø 3.5mm) mounting hole for easy installation.
  • Dimension: 34 X 15 X 14mm.
Add to cart
4-Channel DC Power Distributor

4-Channel DC Power Distributor

100.00 EGP

In stock

4-Channel DC power distributor module.

   Features :
  • Operating voltage: 5~48 DCV.
  • Maximum output current: 10A/Channel.
  • Protection fuse for each channel.
  • Green LED indicator for input voltage.
  • Red LED indicator for each output voltage.
  • 100nF filter capacitor for each output channel.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
  • Dimension: 91 x 72 x 20mm.
Add to cart
Dual Channel UART Serial RS232/TTL Converter (Terminal to Terminal)

Dual Channel UART Serial RS232/TTL Converter (Terminal to Terminal)

100.00 EGP

In stock

Serial UART Module converts serial RS232 to TTL signal using MAX232 IC. It can be used to interface RS232 devices like PCs and some LCDs to microcontrollers and Arduino boards. This module can be used with many microcontrollers (AVR, PIC, Intel, etc), and allows bidirectional communication (converts signals from TTL level to RS232 and from RS232 level to TTL).

 

  Features :

 

  • Converts signals from RS232 to TTL and vice versa.
  • Compatible with many microcontrollers.
  • Operating voltage: 5V.
  • Supports two channels ( Two pairs of Rx, Tx).
  • Red LED indicator for each transmitting signal.
  • Yellow LED indicator for each receiving signal.
  • Green LED for power indication.
  • All Signals are provided through both pin headers and screw clamp terminals for flexibility.
  • Pins are clearly labeled according to their function.
  • Pin header pitch distance 2.54mm.
  • Screw terminal pitch distance 3.5mm.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimensions: 55 X 35 X 12mm.

 

Add to cart
8-Channel Opto-isolated AC Input Detector Module (ACD8)

8-Channel Opto-isolated AC Input Detector Module (ACD8)

100.00 EGP

In stock

This module detects whether AC input exists.

 

  Features :

 

  • Input voltage range 110-250V.
  • Output voltage range 3-24V.
  • Input is opto-isolated for safety.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • LED indicator for AC input.
  • Output and power pins are broken out into a pin header for easy interfacing.
  • Dimensions: 96 X 51 X 15mm.
Add to cart
3+3+2 Digits 0.36” 7-Segment Display Module 36D332

3+3+2 Digits 0.36” 7-Segment Display Module 36D332

100.00 EGP

In stock

36D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
8 Digits 0.36” 7-Segment Display Module 36D800

8 Digits 0.36” 7-Segment Display Module 36D800

100.00 EGP

In stock

36D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
4+4 Digits 0.36” 7-Segment Display Module 36D440

4+4 Digits 0.36” 7-Segment Display Module 36D440

100.00 EGP

In stock

36D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
4-Channel Isolation Module

4-Channel Isolation Module

95.00 EGP

In stock

4-channel opto-isolated module suitable for voltage level converting.

   Features :
  • Two selectable Input control signal ranges (3-12V and 9-24V).
  • Output signal range: 3-24V.
  • LED indicator for each input.
  • Dedicated 2-pin screw clamp terminal for each input and output.
  • Output can drive high or low-triggered load.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
  • Dimensions: 80 X 50 X 17mm.
Add to cart
20A Current Sensor Module (ACS712)

20A Current Sensor Module (ACS712)

90.00 EGP

In stock

20A Current Sensor Module (ACS712).

 

  Features:
  • Operating voltage: 5V.
  • Green LED for power indication.
  • Input interface 5.08mm screw clamp terminal.
  • Power and output signal interface: 2.54mm male pin header.
  • Maximum current: 20A.
  • Dimension: 30 X 13 X 12mm.
Add to cart
2-Channel High/Low Trigger Relay Module(24V) Opto-isolated RM224I

2-Channel High/Low Trigger Relay Module(24V) Opto-isolated RM224I

90.00 EGP

In stock

2-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features : 

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 66 X 47 X 20mm.
Add to cart
3+3 Digits 0.56” 7-Segment Display Module 56D330

3+3 Digits 0.56” 7-Segment Display Module 56D330

90.00 EGP

In stock

56D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. Max7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
3+3 Digits 0.36” 7-Segment Display Module 36D330

3+3 Digits 0.36” 7-Segment Display Module 36D330

90.00 EGP

In stock

36D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.

Select options This product has multiple variants. The options may be chosen on the product page
2-Channel High/Low Trigger Relay Module(12V) opto-isolated RM212I

2-Channel High/Low Trigger Relay Module(12V) opto-isolated RM212I

90.00 EGP

In stock

2-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four (Ø 3.5mm) mounting holes for easy installation.
  • Dimension: 66 X 47 X 20mm.
Add to cart
2-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM205I

2-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM205I

90.00 EGP

In stock

2-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

 

  Features :

 

  • LED indicator for each output relay.
  • Both normally open and normally close are available.
  • Contact current up to 10A (Resistive load).
  • Isolated/non-isolated operation mode.
  • Active high/low trigger operation.
  • Input signals can be applied through screw terminals or pin headers for flexibility.
  • Separated screw terminal power input for relay contact (isolated mode).
  • Reverse polarity protection.
  • Four mounting holes for easy installation.
  • Dimension: 66X30X20 mm.
Add to cart
Breadboard Power Supply Module MB102

Breadboard Power Supply Module MB102

90.00 EGP

In stock

Power supply module for breadboard applications (3.3V, 5V, and VDC).

 

  Features : 

 

  • Input voltage range 6.5V >> 15V.
  • Output voltages 3.3V, 5V, and Vin.
  • Output 5V (USB type A female socket).
  • Output voltages are available via screw terminal block and pin header for flexibility.
  • ON/OFF switch.
  • Reverse polarity protection.
  • Over current protection (1A).
Add to cart