This USB hub has four USB 2.0 ports each with a max total transmission speed of up to 480 MBps. All four ports are powered through the USB-B cable. This hub is great for giving your laptop or computer a few more plug-in options, no adapter is required.
Features:
Number of ports: 4.
no adapter is required.
PC interface: USB type B.
USB device interface: USB type A.
Output: 100mA MAX.
Two (Ø 3.5mm) mounting holes for easy installation.
DB25 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector. DB25 is also suitable for panel mounting and test applications.
Features :
DB25 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the DB25 pin number to which they are routed.
Pin header pitch distance 2.54mm.
Screw terminal pitch distance 3.5mm.
Four (Ø 4mm) mounting holes for easy installation.
36D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
Select options
This product has multiple variants. The options may be chosen on the product page
DB25 male socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB25 and is also suitable for breadboard test applications.
Features :
DB25 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the DB25 pin number to which they are routed.
Pin header pitch distance 2.54mm.
Screw terminal pitch distance 3.5mm.
Four (Ø 3.5mm) mounting holes for easy installation.
DB25 female socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB25 and is also suitable for breadboard test applications.
Features :
DB25 pins are routed to pin headers and screw clamp terminals.
Both terminals are labeled according to the DB25 pin number to which they are routed.
Pin header pitch distance 2.54mm.
Screw terminal pitch distance 3.5mm.
Four (Ø 3.5mm) mounting holes for easy installation.
Serial UART Module converts serial RS232 to TTL signal using MAX232 IC. It can be used to interface PC to microcontrollers and Arduino boards. This module can be used with many microcontrollers (AVR, PIC, Intel, etc), and allows bidirectional communication (converts signals from TTL level to RS232 and from RS232 level to TTL).
Features :
Converts signals from RS232 to TTL and vice versa.
Compatible with many microcontrollers.
Works with any PC or laptop.
Operating voltage: 5V.
Red LED indicator for each signal.
Green LED for power indication.
Signals are provided through pin headers.
Pins are clearly labeled according to their function.
Pin header pitch distance 2.54mm.
Screw terminal pitch distance 3.5mm.
Four (Ø 3mm) mounting holes for easy installation.
Out of stock
